Alex MX
Especificações
Alex MX electronic base load allows effective dimming of fluorescent lamps. The robust 19” rack-mountable unit is ideal for mobile use or as a stationary device. You can use the DMX512 or 0–10 V analog for control. When the DMX512 input signal is lost, you can choose to output the last cue, switch off the outputs, run a sequence or to fade in one of 12 presets. All settings are stored in a non-volatile EEPROM and can be changed at any time.
(PDF informativo)
*12 auxiliary groups operated independently from the lighting console
*5 control curves, including NONDIM
*1 chaser with adjustable hold and fade-times and independent sequence selection
*Individual 0–30 % preheat setting for each channel
*Output limit adjustable from 30–100 % for each channel
*Temperature-controlled forced cooling
*Operating hours meter
*Menu-controlled setting with buttons and encoder
Output stages
*Nominal rating: 12 x 2,5 kVA or 6 x 5 kVA (Alex Mx not available as 5 kVA model)
*Power dissipation: 12 x 2,5 kVA < 1 % (300 W) at full output, 6 x 5 kVA < 2 % (600 W) at full output (90 W at no-load operation)
*Minimum load: not required (0 VA) with Alex Mx
*DC offset on output: ± 1 V (control symmetrical)
*Cos of the controlled load: >0,4
*Risetime: 400 us
Alex MX electronic base load allows effective dimming of fluorescent lamps. The robust 19” rack-mountable unit is ideal for mobile use or as a stationary device. You can use the DMX512 or 0–10 V analog for control. When the DMX512 input signal is lost, you can choose to output the last cue, switch off the outputs, run a sequence or to fade in one of 12 presets. All settings are stored in a non-volatile EEPROM and can be changed at any time.
(PDF informativo)
*12 auxiliary groups operated independently from the lighting console
*5 control curves, including NONDIM
*1 chaser with adjustable hold and fade-times and independent sequence selection
*Individual 0–30 % preheat setting for each channel
*Output limit adjustable from 30–100 % for each channel
*Temperature-controlled forced cooling
*Operating hours meter
*Menu-controlled setting with buttons and encoder
Output stages
*Nominal rating: 12 x 2,5 kVA or 6 x 5 kVA (Alex Mx not available as 5 kVA model)
*Power dissipation: 12 x 2,5 kVA < 1 % (300 W) at full output, 6 x 5 kVA < 2 % (600 W) at full output (90 W at no-load operation)
*Minimum load: not required (0 VA) with Alex Mx
*DC offset on output: ± 1 V (control symmetrical)
*Cos of the controlled load: >0,4
*Risetime: 400 us